Our PLOFLON® PTFE adhesive film with liner belongs to the category of self-adhesive PTFE adhesive tapes, which are equipped with a professional high-performance silicone adhesive on one side. The PLOFLON® PTFE adhesive tapes with liner have the particularly desirable product properties, such as high dielectric insulation, excellent chemical resistance, non-adhesive properties and high heat resistance up to 260 degrees Celsius. Due to their material properties, they are also very flexible and can be stretched within certain limits. This means they can also be used on difficult substrates.
Summary of the special product features:
- PLOFLON® PTFE adhesive film with liner.
- Roll length 10m.
- High dielectric insulation.
- Excellent chemical resistance.
- Non-adhesive properties.
- Heat resistant up to 260 degrees Celsius.
- High flexibility.
Possible areas of application:
- Use in heat sealing systems.
- Packaging machines.
- Pouring and filling systems.
- Heat-resistant masking.
- Insulation of coils and wires
- Heat-resistant electrical insulation.
Technical data:
- Nominal backing thickness: 0.05mm
- Nominal total thickness: 0.08mm
- Bongation: 180%
- Adhesion: 6.0 N/25mm
- Tensile strength: 100 N/5cm
- Breakdown voltage (ASTM D149): 7.8 kV
- Temperature resistance: -73 / +260 degrees Celsius
- Colour: grey:
- Core ID Ø: 38.1mm for 10m tapes
Practical application:
It is important to clean the substrate of dust and oil residues before application and to avoid air pockets, bubbles and creases when applying the tape. To remove the PLOFLON® PTFE adhesive film at a later date, slowly peel off the tape at an angle of 180 degrees. Warning: When PLOFLON® PTFE tape is exposed to temperatures above 316°C (600°F), small quantities of hazardous vapours may be released. INHALATION OF THESE VAPORS MAY BE HARMFUL OR MAY CAUSE RESPIRATORY TRACT IRRITATION. Do not heat or expose PTFE film tapes to temperatures above 316°C (600°F)



